Comments on: How to Set Manual DHCP and a Static IP Address on an iPad or iPhone

By: Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices

Wi-Fi Sync Not Working? Here’s How to Fix it for All iOS Devices — Mon, 18 Feb 2013 18:03:48 +0000

[...] to the same wireless network router, be sure no IP conflicts exist. If an IP conflict is found, use manual DHCP and set a static IP far out of the conflict [...]

By: Get a New IP Address on iPhone or iPad by Renewing DHCP Lease

Get a New IP Address on iPhone or iPad by Renewing DHCP Lease — Fri, 11 Jan 2013 22:33:42 +0000

[...] IP address from a router that any iPhone, iPad, or other iOS device is connected to, you can either set a manual IP address or, what’s likely more relevant to most people, you’ll want to renew the DHCP lease [...]

By: Shane B

Shane B — Sat, 13 Oct 2012 09:50:39 +0000

set the DNS to the router (192.168.0.1 in the example) may well be faster than googles

By: Holysder

Holysder — Mon, 10 Sep 2012 02:24:33 +0000

Yes you are, try it and will be work perfectly…cheers

By: jarod

jarod — Sat, 04 Aug 2012 23:27:05 +0000

Static worked perfectly!

By: Michael

Michael — Thu, 24 May 2012 22:32:50 +0000

Can I set up several WiFi networks SSIDs with static IP data on the iPhone and remember them for later use?

By: Will P

Will P — Sat, 19 May 2012 23:46:07 +0000

I’ve had issues in the past with ‘DHCP with manual address’ configuration using my AT&T U-verse router as the DHCP server. When the DHCP lease expired, iOS and Mac OS clients set to ‘DHCP with manual address’ completely lost the ability to route, by name or IP. I would avoid ‘DHCP with manual address’ configuration if you use your AT&T U-verse router as your DHCP server.