iPad Says “Not Charging” When Plugged Into Computer? Here’s The Fix

Dec 9, 2017 - 6 Comments

iPad says Not Charging when plugged in and how to fix that

You may have noticed that iPad can be charged not only with the included iPad charger, but also by using an iPhone charger, or by connecting an iPad to a computer via USB cable to charge. While all of these methods will charge an iPad battery, though some slower than others, sometimes you may encounter an error message with certain charging methods, where the iPad says it is “Not Charging”. The “Not charging” message usually shows up when iPad is plugged into a computer via USB, but sometimes it will show up when plugged into an iPhone charger as well.

While there are many reasons an iPad may report it is “Not Charging”, a particularly common reason relates to the power source, and thus here offers a simple solution. But there are a few other possible issues that can cause an iPad not to charge as well, so lets cover the most common reasons an iPad will show “not charging” message in the top bar of the device, and what you can do to fix it.

1: Wait! Check the iPad Port for Obstructions

Before going any further and tweaking with power cables and iPad chargers, check the iPad charging port for any potential gunk, dust, lint, debris, or another obstruction.

Use a wooden or plastic toothpick and clean out the port on the bottom of iPad to make sure there’s nothing stuck in there.

Check for port obstructions on iPad which can prevent charging

This probably sounds silly, but it’s more common than you might think to find some kind of stuff jammed into the lighting port on the bottom of iPad, particularly if the iPad gets placed into bags often, or gets used frequently by kids. Mystery lint, play dough, food particles, a grain of rice, dirt, rocks, you’d be surprised at the strange things that can end up jammed into the little charging ports which will prevent the thing from charging at all, so be sure you thoroughly check it and make sure it is clear of obstruction. Anything that interferes with a connection can prevent the device from charging, and while crud prevents iPhone from charging far more often than it might on an iPad, it can still happen to the tablets too.

2: iPad Says “Not Charging” When Plugged Into a Computer with USB? Try This

I frequently see the “Not charging” message on my iPad when it is plugged into a particular USB port on a particular Mac. This suggests that given USB port isn’t sending enough power to be able to sufficiently charge the iPad, so despite being plugged in it may continue to run down the battery, or the very least not actually charge the battery and just show the ‘not charging’ message. Two possible solutions to this are as follows:

  • Try connecting the charger cable to a different USB port on the computer
  • Try a different USB cable completely*

* You can always buy a Lighting USB cable from Amazon for a reasonable price here if need be.

Important: if the USB cable is frayed, torn, or otherwise damaged, you will want to get a new USB cable and use that one instead. A damaged charging cable will be unreliable at best and should be replaced as soon as possible, you can get a new Lighting to USB cable from Amazon for a reasonable price here. Be sure you get a certified charging cable, since cables that are not certified often won’t work.

iPad says Not Charging and how to fix that

That alone may resolve the issue, but not always.

3: Next, Try Connecting iPad to the iPad 12w Wall Charger

A solution that almost always resolves the iPad “Not Charging” message if it relates to power insufficient is plugging the iPad directly into a dedicated iPad 12w charger from a wall outlet. These come with every iPad sold and look like a little square block that plugs into an outlet.

iPad charging 12 watt adapter

Note you want to use the iPad 12w charger, and not a 5w iPhone charger, because while the iPhone charger should technically charge the iPad, it will do so much more slowly simply because the power output is dramatically less (5w vs 12w). You may also experience that if a game or something power hungry is running on iPad while connected to a 5w iPhone charger, the battery may still drain despite being connected, simply because the charger power output is dramatically less than what is intended for iPad. Thus, use the 12w iPad charger, and it should charge just fine.

If you somehow lost the iPad 12w charger you can buy a new one on Amazon for a reasonable price here, some of them are third party chargers so pay attention to who you order from on Amazon.

Now iPad is charging as should be

If you’re still having problems you can also see some tips on how to fix an iPhone that won’t charge here, most of those suggestions apply to an iPad as well.

Those three major tips should solve your iPad charging problems if you see the “Not charging” message in the top bar of the iPad. Give them a go and let us know what works for you in the comments below.

Enjoy this tip? Subscribe to the OSXDaily newsletter to get more of our great Apple tips, tricks, and important news delivered to your inbox! Enter your email address below:

Related articles:

Posted by: Paul Horowitz in iPad, Tips & Tricks, Troubleshooting


» Comments RSS Feed

  1. Nevin says:

    I’ve recently had this problem; would get the ‘Not Charging’ message after connecting my iPad to the Lightning plug. While I suspect it’s probably gunk related, a quick clean-out didn’t help. What did, though, was unplugging the USB plug from the 12w brick, connecting the Lightning port, and then reconnecting the USB plug to the brick.

    Closer inspection of the Lightning port showed wear at the front part of the terminals, so waiting until it was seated before the power was connected allowed it to charge, until I could get a replacement cable.

  2. deej says:

    I’ve found that “not charging” often actually means not charging while the screen is turned on.

    Once the iPad is turned onto standby with the screen off, it often does charge, albeit not necessarily quickly.

    This can be proven by waking the iPad up after a while, and you’ll see the percentage charged has increased. It will also still say “not charging” because the screen is chewing up all the external power!

    This phenomena seems to happen when the amperage of the charging source is insufficient to charge the battery AND power the screen.

    To speed the battery charging up in that situation, turn the iPad off altogether.

  3. Felyne says:

    I had this problem once. I found instructions online that said to shut down the iPad and upon reboot, all at the same time, press the home button, off button and plug in the lightening cable. It’s difficult to do all 3 at the same time, but I’ve had to do this twice over the course of two years and it worked each time.

    • Cathy G says:

      Thanks so much. I had tried everything and nothing worked. I was considering buying a newer iPad. But your suggestion worked!!! Thanks again.

  4. Rhodes Leslie B. says:

    Please put me on your mailing list.

  5. Lee says:

    I have a real Apple rip off USB cable. When connecting it to my iPhone 6 Plus via a USB charger, always works. When connected to my Mac mini (does not matter what USB port is used) now and again the phone says it cannot use the cable because its not authenticate cable. I mean, disgusting that some rubbish has been done to force you to buy an over priced USB cable, and this has taken place since upgrading to iOS 11. So I think now, dont upgrade Apple devices, they kill more things off to force you to buy new rubbish you dont need. Mac mini also back on 10.12.6, 10.13 is a joke

Leave a Reply


Shop for Apple & Mac Deals on Amazon.com

Subscribe to OSXDaily

Subscribe to RSS Subscribe to Twitter Feed Follow on Facebook Subscribe to eMail Updates

Recent Posts