Stuck in Yosemite with OS X Installer Drive and a Missing OS X Mavericks Partition? Here’s the Fix

Jul 31, 2014 - 8 Comments

OS X Yosemite and a Missing Mavericks partition

Some Mac users who partitioned their Macs to dual boot between the beta OS X Yosemite builds and stable OS X Mavericks releases have discovered a disconcerting issue; their Mavericks partition seems to have vanished and been replaced by an “OS X Installer” partition, forcing them to be stuck in OS X Yosemite. The obvious concern is that data loss occurred, but assuming you didn’t accidentally format the Mavericks drive, it has not, instead, the volume is just temporarily missing, having been taken over by the Yosemite Installer.


To clarify the problem description, it’s fairly easily identified: after partitioning a Mac for dual booting between OS X Yosemite and Mavericks, a user reboots with the Option key to bring up a few partitions; the Yosemite drive, a Recovery HD drive, and a “OS X Installer” partition… but no Mavericks partition is available or visible. Not to worry, the drive is still there, and there are two simple solutions if you run into the missing OS X Mavericks partition, use whichever is appropriate for your situation:

Restore & Boot Into Missing Mavericks Partition from Yosemite During Mac System Reboot

  1. Reboot the Mac
  2. Hold down Command+R to boot into Recovery Mode
  3. Go to the  Apple menu and choose “Startup Disk”
  4. Select the “OS X Mavericks” partition to boot into (the version number of OS X will be listed), choose “Continue” and “Restart” to boot into Mavericks

Select Mavericks partition from OS X Yosemite to return back at boot

That’s it, you’re back in Mavericks. Now you can reboot and dual boot between Yosemite and Mavericks as usual with the Option key, or by continuing to go through the Startup Disk menu within either version of OS X, which we’ll describe next;

Returning to OS X Mavericks While Booted in OS X Yosemite (or Vice Versa)

  1. Go to  Apple menu and then to System Preferences
  2. Head to “Startup Disk”
  3. Select the appropriate “OS X Mavericks” partition from the drive list as the new default startup volume
  4. Whenever appropriate, restart the Mac and you’ll boot back into Mavericks (or Yosemite, if selected)

Switch boot volumes from Yosemite to Mavericks with Startup Disk

Again, rebooting the Mac will now go into the volume you chose, whether Yosemite or Mavericks. Or you can use the Option key on boot to get the startup disk selection upon restart. Thanks to Phil for pointing this solution out in our comments!

With whatever method, you should only need to do this action once to restore the “OS X Installer” partition to become the expected Mavericks “Macintosh HD” (or whatever your drive is named) partition. Again, after this has been completed, you can now regularly dual boot between OS X Yosemite and OS X Mavericks on their respective partitions as originally intended.

This issue seems to occur somewhat randomly and has not impacted all users, but it can happen whether Yosemite was installed from a USB boot drive or directly from the downloaded installer from the Applications folder. Obviously a bug, and that sort of thing comes with the territory given the OS X Yosemite Beta and Developer Preview builds are not final release software. Fortunately it’s easily resolved, so if you happen to encounter this issue, just rely on Startup Disk to quickly fix it.

Find any other bugs or inconveniences with the beta build? Don’t forget to send feedback about Yosemite to help shape the future of OS X.

.

Related articles:

Posted by: Paul Horowitz in Mac OS, Troubleshooting

8 Comments

» Comments RSS Feed

  1. sp says:

    it has happened to me when i was trying to install ML on external drive.
    but when pressing and holding alt/option only one option appeared to boot from … ”OS X Installer”
    no recovery partition though i had one no nothing

  2. ozzy says:

    i have this situation only worse!I can not see mavericks partition on the startup disk selection.i can see in the disk utility that the partition is still there but when I try to boot that partition I can only boot to osx installer
    .any solution?

  3. Rhemmie says:

    I did not do a Time Machine before upgrading to Yosemite nor do any back up since its a new mac and doesnt have any files yet and i will like to downgrade back because it doesn’t support YAHOO MESSENGER and its one of the best apps that i use alot.. please what can i do.

  4. Romain says:

    Hi I have exactly the same issue : my External Hard Drive that contains my Maverick clone is no more recognized after that installed Yosemite from it (Yosemite installer). Indeed, it’s still seen as “Installer OS” when I keep Alt button at the start, but no more as “Save SSD” which is its original name….
    I add that all is working fine (both Yosemite and the Ext. HD) but Yosemite does not see it even using Recovery as you explained… :(
    Any idea ? Thx

  5. Robin says:

    Robin, did you do a Time Machine backup before downgrading to Yosemite? If so, you’ll be fine! Here’s what you do:
    1.) Backup your computer NOW before doing the following steps… so if the following steps don’t work, you haven’t lost your data.
    2.) Restart your computer into Recovery Mode (hold down Command+R while your computer is restarting).
    3.) On the next window that appears, select RESTORE FROM TIME MACHINE BACKUP.
    4.) Obviously, choose your Mavericks backup in the next window that appears.
    5.) Wait the 2 to 5 hours it will take to restore.
    Voila! You’re done. You will be upgraded back to your Mavericks.

  6. Robin says:

    Could somebody please explain for those of us who are over 40?

    Yosemite doesn’t work right and I want it gone. Full stop.
    I don’t have a clue about “partitioning” etc.

    How do I make it go away and get back to basics?

  7. Witty says:

    Solution never simpler

  8. FarmerBob says:

    What I have had happen is the Recovery Partition for 10.9 is gone. Where once there was one each for each of the OS’s that have a tag-a-long recovery partition. And in the beginning it was hard to tell which one was for which OS, besides their position in the line up, that did line with the order that the OS drives were. Once my 10.9 Recovery partition disappeared, the 10.10 Recovery was then labeled, Recovery-10.10.

    Now if they have consolidated both OS’s in to one Recovery partition that will recognize the OS and deal with it appropriately, that’s great. But nobody told me and marking it Recovery-10.10 would lead me to believe it’s exclusive.

Leave a Reply

 

Shop on Amazon.com and help support OSXDaily!

Subscribe to OSXDaily

Subscribe to RSS Subscribe to Twitter Feed Follow on Facebook Subscribe to eMail Updates

Tips & Tricks

News

iPhone / iPad

Mac

Troubleshooting

Shop on Amazon to help support this site